Perma Construction Aids Private Limited

• High adhesive strength
• Accurate composition
• Easy to apply

• Perma - Hyper Plast - HP34 Plast is based on hyper plasticising sulphonated synthetic polymers
• It may be dispensed at dosages varying between 1 to 2 percent by weight of cement depending upon type of concrete required

• Perma Plast-Super-PS34 should be added to the mix during the cycle at the same time as the water or the aggregates
• Never add Perma Plast-Super-PS34 to dry cement
• No extention to mixing time is necessary
• Alternatively when using Perma Plast-Super-PS34 to produce flowing concrete at site using ready mix trucks
• It can be added to the concrete via the hopper at the rear of the truck a few minutes before use, at a minimum drum revolution of 10 r.p.m. to produce a fully homogenous mix

• Hyper plasticising action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates
• Perma - Hyper Plast-HP34 maintains the workability over long periods
• Perma - Hyper Plast-HP34 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete
• Perma - Hyper Plast-HP34 is compatible with all types of cements including puzzolonic, fly ash / slag cements and Microsillica
• Perma - Hyper-HP34 Plast is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders
• Perma - Hyper Plast-HP34 enables production of dense impermeable and fair finish concrete

• Perma - Hyper Plast-HP34 is recommended in all high grade concrete which has a cement content of over 375 kgs. per m³
• Perma - Hyper Plast-HP34 is recommended in hot weather concreting where workability retention over long periods are required
• Perma - Hyper Plast-HP34 is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance
• Perma - Hyper Plast-HP34 is also recommende where very high initial and ultimate strengths are expected
• Perma-Hyper Plast-HP34 is also recommended for use with Microsillica

• Perma - Hyper Plast-HP34 is available in 25 kgs, and 260 kgs, drum

• Complying to ASTM C 494 Type A, F. and G IS - 9103-79

Additional Information:

• Item Code: HP34

• Provide accurate proofing
• Highly effective
• Longer shelf life

• Perma Plast-AC is a silicate based liquid which acts as a plasticising accelerator for cement concrete and mortars
• Perma Plast–AC admixed mortars and concretes set fast giving early & final high strength
• Perma Plast-AC is of special use in shot-creting, guniting and concreting in very low temperatures

• Rebound losses in shot-creting and guniting are minimized
• Saving on material, labour and machine time
• Perma Plast-AC is liquid in form, hence easy to use
• The plasticising action of Perma Plast-AC helps in complete hydration of cement there by achieving superior strength
• Wastage due to breaking in pre-cast elements is reduced saving on production cost
• Perma Plast-AC can be used with all types of cements

• Required dosage of Perma Plast-AC has to be arrived at site by practical trials
• The dosage is dependent on temperature conditions, type of cement, type of acceleration required
• We however recommend dosages of 1 to 10 percent by weight of cement
• Lower dosages are however used in pre-cast elements and higher dosages are used in shot-creting

• Perma Plast–AC is of special use in guniting and shot-creting as its accelerated setting times help in quick rebuilding of mortar layers without colla-pse
• Rebound losses in shot-creting and guniting are minimized
• Early shifting of the pre-cast elements is facilitated
• In pre-cast hollow / solid blocks, pavers, cement tiles, breaking of the edges while lifting the moulds is minimized
• Perma Plast–AC helps in early setting of mortars and concrete in low temperature climates

• Over dosage of Perma Plast–AC results in flash settings of concrete or mortars
• Do not use frozen aggregates in concreting in low temperature areas
• For best results keep gauging water to a minimum
• Areas to be concreted or shot-creted should be free from ice
• Fresh concrete should be so sheltered as to ensure the preservation of heat of hydration evolved

• Perma Plast-AC is available in 20 litre & 210 litre drums

• In last setting concretes and mortars
• Concreting of pre-cast elements
• Concreting and rendening in very low temperatures
• In reducing rebound losses in sprayed mortar
• To waterproof plaster and concrete

• Accurate composition
• Longer shelf life
• Easily soluble

• In fast setting concretes and mortars
• Concreting of pre-cast elements
• Concreting and rendering in very low temprature
• In reducing rebound losses in sprayed mortar
• To waterproof plaster and concrete

• Rebound losses in plastering mortar shot- dem, and guniting are rninimized
• Saving on matena. labour and machine time
• Perma Plast Clear QS is liquid in form. hence ea, to use
• The plastidzing action of Perma Plast Clear QS helps in complete hydration of cement there by achieving superior strength
• Wastage due to breaking in pre-cast elements is reduced savings on production cost
• Perma Plast Clear QS can be used with all types of elements
• To waterproof plaster and concrete

• Form: Chloride free liquid
• Specific Gravity: 1.22 +/- 0.05
• Air Entrainment: NIL
• Chlorides: NIL
• Sulphides: NIL
• Nitrates: NIL
• Flash Point: None

• Optimum quality
• Provide accurate proofing
• Longer shelf life

• Perma Plast Super 220 is a high range, low dosage, super plasticising edmixture for slump retention
• It is a product based on refined naphthalene formaldehyde and lingnouslphate blends

• To produce self compacting flowing concrete
• To produce high early strength concrete for delayed slup retention and for long over hauls
• Ideally suited for commercial RMC plants and concrete made with crushed sand

• Perma Plast Super 220 is available in 220 kg & 240 kg HDPE drum

• Colour: Dark Brown/ black Liquid
• Specific Gravity: 1.2 at 25C+ 0.1
• Air Entrainment: 1% maximum
• Packing: 120 kg & 240 kg

Additional Information:

• Item Code: 200

• Safe to use
• Precise composition
• Water proof nature

• Perma Plast PC 302 is based on Polycarboxylic ether and synthetic polymers
• It may be dispensed at dosage varying between 0.6 to 2 percent by weight of cemnt depending upon type of concrete required.

• Complying to: ASTM C494:Type AF And G IS 9103-79

• Perma Plast-PC 302 is recommended In all high grade concrete which has a cement conterrt of over 375 kgs
• Perrna Plast-PC 302 is recommended In hot weather concreting where wod.ility retention over long periods are required
• Perrna Plast-PC 302 is recommended in marine structures, pile foundations, bridage girders, caissons and such struchires where quality of concrete Is of prime Importance
• Perma Plast-PC 302 Is also recommended where very high Intel and ultimate strengths are expected
• Pena Plast-PC 302 Is also recommended for use with microsillica

• Hyper plasticising action of this product produces free flowing concrete with most kind of aggregates and varying fine aggregates
• Perma Plast PC 202 maintains the workability over long period
• Perma Plast PC 202 help in production of high quality concrete which exhibits superior compressive, tensile and flexural strength and exhibits excellent resistance to chloride and sulphide attacks on concrete

• Perma Plast PC 302 is available in 30 kgs and 250 kgs drum

• Hyper plasticlsing action of this product produces free flowing concrete, with most kinds of aggregates and verying fine aggregates
• Perma Plast-PC 302 maintains the wonkability over long periods
• Perma Plast-PC 302 helps in production of high quality concrete which exhibits superlor

• High solubility
• Highly stable
• Optimum quality

• Perma Rheoplast is based on hyper plasticising sulphonated synthetic naphthalene polymers
• It may dispensed at dosages varying between 0.3 to 1% by weight of cement depending upon type of concrete required

• Complying to ASTM C 494 type A, F And G IS-9103-79

• Perma Rheoplast is recommended in all high grade concrete which has a cement content of over 375 kgs
• Perrna Rheoplast is recommended in hot weather concreting where workability retention over long periods are required
• Perma Rheoplast is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance
• Perma Rheoplast is also recommended where very high initial and ultimate strengths are expected
• Perrna Rheoplast is an ideal product to used in R.M.C. plants

• Hyper Plasticising action of this product produces free flowing concrete, with most kind of aggregates and varying fine aggregates
• Perma rheoplast maintains the workability over long periods
• Perma rheoplast helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strength and exibits excellent resistance to chloride and sulphine attacks on concrete
• Perma rheoplast is compatible with all type of cement including puzzolonic any fly ash / slag cement

• Colour: Dark Brown liquied
• Specific Gravity: 1.16±0.01
• Ph Value: 7.5
• Sulphates: 0.5%

• Perma Plast BP is based on hyper plastering sulphonated synthetic polymers. It may be dispensed at dosages varying between 1 to 2 percent by weight of cement depending upon type of concrete required

• PERMA PLAST-BP is recommended in all high grade concrete which has a cernent content of over 375 kgs. per rn3
• PERMA PLAST-BP is recommended in hol weather concreting where workability retention over long periods are required
• PERMA PLAST-BP is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance
• PERMA PLAST-BP is also recommended where very high initial and ultimate strengths are expected.

• Perma Plast BP is available in 30 kgs and 250 kgs HDPE drum

• Perma Plast Super 330 is a high range, low dosage super plastering admixture for slump retention. It is a protect based on refined naphthalne formadehyde blends

• To produce self compacting flowing concrete. To produce high early strength concrete ofr delayed slupm retention and for long over hauls. Ideally suited for commercial RMC plant

• Field trails should be conducted to determine the optimum addition rates of perma plaste super 300

• Perma plast super 330 is available in 240 kg

• Colour: Dark Brown/Black liquied
• Specific Gravity: 1.20 at 25ºC±0.1
• Packing: 240 kg

• Eco-friendly
• Accurate composition
• Strong sealing

• Perma Retard is a liquid admixture for concrete based on refined Ligno sulphonates and Naphthalene formaldehyde blends
• Perma Retard helps in production of super plasticised and set retarded concrete to enable the delayed pouring of concrete after its production or to get over the problems arising during hot weather concreting

• Use of Perma Retard in hot weather ensures continuous pours resulting in monolithic sound concrete
• Improves ultimate strengths significantly. Helps saving in cements in rich mixes

• To produce concrete with delayed initial and final setting times

• Field Trials should be carried out with the given cement and aggregates to arrive at optimum dosages for the desired property to be achieved
• However for guidance we specify a range of 0.3 to 0.9 percent by weight of cement

• 20 Litres, 100 Litres and 210 Litres drum

• Provides perfect fixing
• Temperature resistance
• High strength

• Perma Plast-Super-PS34 should be added to the mix during the cycle at the same time as the water or the aggregates
• Never add Perma Plast-Super-PS34 to dry cement. No extention to mixing time is necessary
• Alternatively when using Perma Plast-Super-PS34 to produce flowing concrete at site using ready mix trucks
• It can be added to the concrete via the hopper at the rear of the truck a few minutes before use, at a minimum drum revolution of 10 r.p.m. to produce a fully homogenous mix

• Increased workability-A concrete with a slump of 50 to 100 mm can be turned into self compacting, flowing concrete that requires little or no vibration, with the simple addition of Perma Plast-Super-PS34
• High strength mixes-Due to reduction in water content higher grade concrete can be produced at normal workabilities and cement contents
• Improved Compaction-Concrete can be placed and compacted more quickly and easily when Perma Plast-Super-PS34 is incorporated to the mix
• Superior Finish-Surface finish is improved, sand runs and blemishes are reduced
• Durable Concrete-Enables production of economical, dense and more permeable concrete

• To produce self-compacting flowing concrete
• To produce high early strength concrete

• Field trials should be conducted to determine the optimum addition rates of Perma Plast-Super-PS34
• As a guide to these trials, the following figures are recommended as a starting point:
• Water Reduced Concrete Dosage % WaterReduction (cc per 50 Kgs.of Cement):
• 10 to 15: 150
• 15 to 20: 310
• 20 to 30: 450
• 30 to 35: 600

• Perma Plast-Super-PS34 is available in 24 kgs and 250 kgs drum

• Complying to: A. S. T. M. C494: 1977 Types A, B, D, E & F CRD-C 87-79: 5075: Part I Institute of Bautechnik: Type BV. IS 9103-79

• Highly effective
• Precise quality
• Protect walls from external environment

• Perma-Multi Plast is an unique admixture based on complex polymeric chemical structure which works wonderfully with all grades of concrete in all weather conditions
• It imparts high compressive tensile and flexural strength to the concrete
• This admixture is of immense use in making the concrete highly workable and in retaining the workability overlong hours

• Perma Multi Plast is recommended in all type of concrete
• Perma Multi Plast is recommended in hot weather concreting where workability retention over long period are required
• Perma Multi Plast is also recommended where very high initial and ultimate strength are expected

• Multi plasticising action of this product produces free flowing concrete with most kind of aggregates and varying fine aggregates
• Perma Multi Plast maintains the workability over long periods
• Perma Multi Plast help in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete
• Perma Multi Plast is compatible with all type of cement including puzzolonic any fly ash / slag cement
• Perma Multi Plast is specially suggested in all high strength concrete
• Perma Multi Plast enables production of dence impermeable and fair finish concrete

• Complying to ASTMC 494 Type A, F, and G IS-9103-2007

• Provide accurate proofing
• Optimum quality
• Highly effective

• To increase workability
• To increase strength and durability
• For hot weather concreting
• To reduce segregation

• Increase workability
• Improves cohesive property in concrete
• Reduces water demand in concrete

• Long lasting quality
• Safe to use
• Precise composition

• Perma Plast-CN is a corrosion inhibiting admixture for reinforced cement concrete which protects the reinforcing steel in the concrete from corrosion
• Porous concrete allows ingress of water and moisture in the RCC structures, which starts corroding the reinforcing steel thereby reducing the life of concrete member and the structure itself
• An addition of Perma Plast CN in the concrete at the recommended dosage during construction itself ensures corrosion free reinforcing steel with its long life

• Perma Plast CN is a liquid which easily mixes with water hence can be dosed along with water
• Perma Plast CN is compatible with all types of cements and with other adrnixtures
• It is a VOC free product and hence safe for the environment
• Otis free from chlorides and sulphates and is non hazardous It increases the life of the structure by protecting the steel
• Perrna Plast CN does not affect the plastic properties of the concrete

• Perma Plast CN is Available in 120 kg and 250 kg

• Colour: Light Straw Liquid
• Specific Gravity: 1.6 to 1.18
• Solid Content: 30%
• Ph Value: 7 to 9
• ASTM C494: Type A, C, E & F
• BS 5075: Part 3

• Precise composition
• Longer shelf life
• Eco friendly

• Perma Plast PC 202 is based on Polycarboxylic ether and synthetic polymers
• It may be dispensed at dosage varying between 0.6 to 2 percent by weight of cemnt depending upon type of concrete required

• Complying to: ASTM C494:Type AF And G IS 9103-79

• Perma Plast-PC 202 is recommended In all high grade concrete which has a cement conterrt of over 375 kgs
• Perrna Plast-PC 202 is recommended In hot weather concreting where wod.ility retention over long periods are required
• Perrna Plast-PC 202 is recommended in marine structures, pile foundations, bridage girders, caissons and such struchires where quality of concrete Is of prime Importance
• Perma Plast-PC 202 Is also recommended where very high Intel and ultimate strengths are expected
• Pena Plast-PC 202 Is also recommended for use with microsillica

• Hyper plasticising action of this product produces free flowing concrete with most kind of aggregates and varying fine aggregates
• Perma Plast PC 202 maintains the workability over long period
• Perma Plast PC 202 help in production of high quality concrete which exhibits superior compressive, tensile and flexural strength and exhibits excellent resistance to chloride and sulphide attacks on concrete

• To produce self - compacting flowing concrete
• To produce high early strength concrete for delayed slump retention and for long over hauls
• Ideally suited for commercial RMC plants and concrete made with crushed sand
• Dosage: Field trials should be conducted to determine the optimum addition rates of perrna plast super - 220, however a dosage of 300 gms to 500 gms is recommended per 50 kg bag of cement
• Packing: Perma Plast Super - 220 is available in 120 kg & 240 Kg HDPE drum

• Highly effective
• Precise quality
• Protect walls from external environment

• Perma Grout-500 is a fine free flowing grey powder with a wide range of grouting applications, mainly to produce expansive grouting slurries, mortars and concrete

• Perma Grout-500 when admixed with cement imparts an expansion of 6% in cement slurries
• This expansion ensures proper contact and good adhesion of the slurries with inner surfaces of the pocket to be grouted
• Perma Grout-500 imparts free flowing properties in cement slurries and mortars
• This property is extremely essential in any grouting situation
• Perma Grout-500 imparts high early and ultimate strengths to grouting slurries, mortars & concrete
• Perma Grout-500 improves the quality of grouting material
• Perma Grout-500 is free from metallic iron chlorides, sulphates and nitrates

• All grouting products exhibit the properties when used in restrained conditions
• When used in open areas or shallow pockets where depth is less than its width the unrestrained expansion causes surface cracks and results in very low compressive strengths
• Perma grout-500 should be used at a dosage of 500 gms or less per 50 kg bag of cement
• Higher dosages will led to poor strength and result in setting problems
• In cable duct grouting the slurry should be pumped at a pressure of 0.3 MPA continuously till completion
• The grout should flow at a speed of 5 to 10 meters per minute

• Ordinary portalnd cement; 50kgs
• Zone II Sand; 50kgs
• Perma Grout-500: 500 gms
• Water: 15 to 18 litres
• Yield: 0.056

• Cement: 50 kgs
• Sand: 100 kgs
• Aggregates: 200 kgs
• Perma Grout 500: 15 to 18 litres
• Yield: 0.056 m3

• Strictly Perma Grout - 500 gms per 50 kg bag of cement
• Dosage not to be exceeded except under special circumstances or under the guidance of Perma technical staff

• Perma Grout-500 is an admixture for grouting Cement slurries, grouting mortars and non shrink concrete
• Perma Grout-500 is a free flowing grey powder especially designed for cable duct grouting in post tensioned bridge griders, injection grouting of porous concrete in structural rehabilitation works and in infil mortars in filling and sealing cut outs, recesses and foundation pockets

• Top notch quality
• Easy to apply
• Longer shelf life

• Perma plast ex is a water reducing and general purpose plasticiser for concrete
• It is a product based upon lingo sulphonates. Ideally functions like an integral waterproofing compound in concrete and mortar

• Field trials should be conducted to determine the optimum addition rates of Perma Plast-EX
• A dosage range of 140 ml to 280 ml per 50 kgs of cement is recommended as an initial starting point

• Perma Plast-Ex is available in 2, 20 and 210 litres

• To increase workability
• To increase compressive strength
• To effect cement economies
• For hot weather concreting
• For waterproofing of concrete and mortar

• Elevated shelf life
• Accurate composition
• Effective

• Perma Plast is a water reducing plasticiser for concrete
• It is a product based upon refined lingo sulphonates

• ASTM C 494: Types A & D
• CRD - C - 87: Types A & D
• BS 5075: Part 1
• Institute of Bau Technik: Type BV
• IS: 9103-79

• To increase workability
• To increase compressive strength
• To effect cement economies
• For hot weather concreting

• Field trials should be conducted to determine the optimum addition rates of Perma Plast
• A dosage range of 140 cc to 280 cc per 50 kgs of cement is recommended as an initial starting point

• Perma Plast is available in 2, 20 and 210 litres drum

• Increase workability Significantly Improves the workability therefore ease of placing
• Improves the cohesive properties of the concrete helping to reduce segregation and bleeding
• Reduces water demand- Allows water reduction in the region of 10% to be achieved while maintaining workability, there by increasing strength, durability and impermeability
• Enables economies in the mix designs to be achieved, therefore saving cement

Perma Plast AEA it is a high performance, chloride-free water reducing cum air entraining agent for mortars, concrete and lightweight aggregate mixes. The introduction of Perma Plast AEA brings about entrainment of innumerable microscopic air bubbles of suitable size and spacing evenly distributed throughout the matrix.

Perma Plast AEA it should be used or added during the mixing operation. it is necessary to carry out a preliminary site trial to determine the amount of air entrained in fresh concrete or mortars. Perma Plast AEA depends upon the flow and air entrainment required. Preliminary trials should be conducted at site to determine the optimum dosages. After addition of the Perma Plast AEA concrete should be thoroughly mixed so as to achieve a uniform consistency and homogeneity.

Melamine Based Super Plasticiser

• Optimum adhesive quality
• Prevent corrosion
• Low viscosity

• Perma Plast MF is a superior quality super plasticiser cum water reducer based on high molecular weight sulphonated melamine formaldelyde condesate

• Perma Plast MF is a clear to light straw colored liquid hence does not change the colour of conrete
• Perma Plast MF is highly useful in pre cast units, and in tile factories
• Perma Plast MF is of special advantages in tyrolian reners and in white cement based textured coating
• Perma Plast MF is very easy to dose
• The dosing quality of the material can be added to the concrete or mortar mix at any state of mixing

• Perma Plast MF is supplied in 10 kg, 30 kg, 120 kg and 240 kg packs

• To increase the workability in concrete used in casting pre-cast units, cement ties, coloured paying blocks and for use in white cement mixes used for decorative render etc
• To increase the compressive strengths
• To bring about cement economies
• For hot weather concreting

• Safe to use
• Optimum quality
• Effective

• Increased workability-Aconcretewitha slump of 50 to 100 mm can be turned into setf compacting, flowing concrete that requires little or no vibration, with the simple addition of Perms Plash-PC 201
• High strength mixes-Due to reduction in water corrient higher grade concrete can be produced at normal workabilities and cement contents
• Improved compaction-Concrete can be placed and compacted more quickly and easily when Per ma Plash-PC 201 is incorporated to the mjx
• Superior Flnish-Surface finish Is improved, sand runs and blemishes are reduced
• Durable Concrete-Enables production of economical, dense and more permeable concrete

• Perma Plast PC 201 is available in 30 kg and 250 kg drum

• To produce self-compacting flowing concrete
• To produce high early strength concrete for delayed slump retention and for long over hauls

• Complying to: ASTM C494:1977, Type A, B, D & E
• CRD-C87-79: 5075: Part I Institute of Bautechnik: Type BV. IS 9103-79

• Parma Plast 502 is a superior quality super plasticiser cum very high range water reducer based on high molucular weight polycarboxylic copolymers

• Perma Plast PC 502 is a light colored liquid hence does not change the colour of concrete
• Perma Plast PC 502 is highly useful in pre cast unit
• Perma Plast PC 502 is of special advantage in concreting RCC members with congested reinforcement
• Perma Plast PC 502 is very easy to dose. The dosing quantity of the material can be added to the concrete or mortar mix at any stage of mixing

• Field trials should be conducted to detemine the optimum dosage of perma plast pc 502 for each application. However dosage range is between 100 ml to 1000 ml per 50 kg bag of cement depending upon the end result desired

• Perma Plast PC 502 is supplied in 30 kg, 125 kg and 250 kg packs

• To produce free flowing and self compacting concrete
• To increase the compresslve strengths of the concrets and mortars to highest possible limits
• To bring down the water cement ratios to bare minium
• To bring down the water cement ratios to bare minium
• To achieve early high strengths
• To achieve prolonged workability

Perma Plast is a water reducing super plasticiser for concrete. It is a product based on refined lingo sulphonates.

PRIMARY USES

1. To increase workability.
2. To increase compressive strength.
3. To effect cement economies.
4. For hot weather concreting.