Perma Construction Aids Private Limited

We manufacture Concrete Admixture Powder for construction in India. Perma concrete set powder is an accelerating powder admixture for concrete and accelerating powder admixture for mortar. The Concrete Setting Admixture Powder highly demanded in paver block industry.

Perma Concrete Set Powder is a accelerating admixture for use in non reinforced concrete and mortars. When admixed with concrete and mortar along with water Perma Concrete Set Powder accelerates the setting time of the concrete and mortar and helps in achieving high early strength. This product is of use in shot-creting and guniting and in concreting and rendering in cold climatic conditions. Paver industry can highly benefit from the use of this product as it helps in early de-moulding and early shifting of the paver blocks to site saving enormous amount of space utilized in conventional curing and its strength development.

Concrete Set Powder used in :

In fast setting of concretes and mortars

Concreting of pre-cast elements

Concreting and rendering at very low temperatures

In reducing rebound losses of sprayed mortars

In paver block industry

In casting yards of hollow and solid building blocks

Additional Information:

• Packaging Details: Perma Concrete Set Powder is available in 10 Kg & 25 Kg sacks.

• Environment friendly
• Safe to use
• Easily soluble

• Perma MRA is a chemical release agent suitable fo shutters and Moulds
• Clean release gives a fair faced concrete surface

• Perma MRA is suitable for all types of shutters and moulds
• Parma MRA can be applied to steel, timber. plywood, plastic and ruber moulds also

• Perma MRA gives very good shutter releasing properties
• Other oils used in similar application penetrate into the concrete and interfere with the strength of the member
• Apart from this they leave ugly stains on the concrete surface
• Before subsequent finishes one needs to chemically or mechanically remove these stains and lett overt of these oils
• Perma MRA is designed keeping all these problems in mind and to ensure least damages to the shutters and to the concrete
• Application of conventional mould releasing oils is tedious and time consuming
• Perma MRA can be sprayed saving time and labour

• Outstanding stability
• Provide accurate proofing
• Reliable

• Perma Plaster Putty Gold is a very fine quality powder putty with high polymer content and very refined fillers
• This provides an ideal base for expensive and good quality paints

• Creation of smooth surface for application of paint to the walls and ceiling
• It can be used on plasters
• RCC or brick or block work directly

• Perma Plaster Putty Gold is available in 20 kg & 40 kg mufti wall laminated sacks

Additional Information:

• Packaging Details: 75 gms

GREY Polyurethane Sealant :

PERMA PU SEALANT - GREY is used in expansion joints internally and externally.
It is ideal for use at the junction of precast elements of building. It is used for sealing joints between dissimilar materials such as metal, wood concrete etc

PERMA PU SEALANT - GREY is tough and hence resists foot traffic. It is suitable for sealing expansion joints in the walkways and on podiums.

PERMA PU SEALANT - GREY is resistant to UV light hence in the exposed conditions its color is unaffected.

• Water soluble
• Protect walls from external environment
• Easy to use

• RE Con Fibres are precision cut polypropylene fibres in two sizes of 6 mm and 12 urn which are used in piasters and in
• Floor screeds to produce crack free and durable wall piasters, concrete panels and durabie floor screeds, Re - Con
• Fibres are milky AID strands al poly propylene supplied in 6 m and 12 trim lengths, The smaller 6 m ones are used in
• Piaster aloes where as the longer 12 mm ones are used in floor screeds.

• Re-Con Fibres when mixed in mortar or screed concrete disperse themselves Immediately and uniformly to act as
• Reinforcements which do not allow the hardened plasters and floor screeds to crack.

• Re- Con Fibres make the plasters and screeds crack free
• Re-Con Fibres Improves the compressive, tensile and flexural strengths of mortars and weed concretes.
• Viten used in floor screed Re-Con Fibres increases the abrasive strength and hence long life of the industrial floors
• Re-Con Fibres are non corrosive hence long life of plasters and screeds

• In mortar mixes add 125 gms of 6 mm Fie-Con Fibres per bag of 50 kg cement for achieving a crack free internal and external piasters
• In floors screed add 125 grns at 12 mm Re-Con Fibres per 50 kg bag of cement for achieving a crack free and aberration resisting floors

• Chemical stability
• Purity
• Safe to use

• Perma Floor Top is a floor hardening compound based on non-oxidising
• Metallic or non metallic aggregates a blend of ordinary portland cements
• Activating chemicals. Perma Floor Top is for use on green concrete of industrial
• Floors to achieve high abrasion and Impact resistance properties on the finished Floors

• Perma Floor Top AL Based on non-oxidising metallic aggregates
• Perma Floor Top QZ: Based on non-metallic aggregates

• Perma Floor Top products are designed for high abrasion
• Impact resistance properties to the commie floors

• Purity
• Precise composition
• Eco friendly

• Perma Cure WB White is a pigmented wax based emulsion for retaining
• Water in concrete for effective rtycfration of cement

• Perma Cure WB White provides a highly economical and efficient means of retaining the water in fresh concrete
• The presence of wateris essential to ensure the strength development in concrete.
• The membrane tormed by PERMA CURE W8 WHITE prevents concrete from premature drying out anti, therefore enables the process of hydration to proceed under optimum conditions.
• As a consequence, the finished cenciete has a harder, dust free surface whlist drying shrinkage and crazing (hair cracics) an3 reduced to a minimum

• Extremely cost effective
• Gives water repellent film
• Initial white colour shows areas of use

• Accurate composition
• Highly effective
• High efficiency

• Perma Grout 40 is a free flowing shrinkage compensating grout mix supplied in grey powder form
• Which needs only on site addition of water to form a ready to use grouting slurry

• Machine foundations
• Column/Stanchion foundations
• Grouting structural cut outs and recesses in sanitary fittings like floor traps, annular spaces of pipe passes through walls etc, in residential buildings
• Grouting crane rails, anchor bolts, dowel bars etc

• Perma Grout - 40 achieves the strength of parent concrete within 72 hours i.e. 200 kgs/cm2
• Perma Grout - 40 is shrinkage compensating hence least affected by shrinkage
• Perma Grout - 40 is tree flowing and self leveling hence dose not require any vibrations
• Perma Grout - 40 is free from any added Chlorides, Sulphates, Nitrates and any ferrous materials. Perma Grout - 40 achieves a final strength of 400 kgs/cm2 atter 7 days

• Highly soluble
• Weather resistance
• Provide accurate proofing

• Perma Anchor Fix - 80 is a polyester resin based grout which is used in locations where very high early and ultimate strengths are required along with chemical resistance properties
• The product is supplied in pre measured two component units

• Praimary Uses Anchor Fix - 80 is used for installation of dowel bars in concrete and for providing starter bars in RCC structures for continuation structural concrete or in extension of structural members
• Anchor Fix-80 can be used for fixing foundation bolts, base plates and rail tracks
• Because of its thbrotropic nature the product is successfully used in vertical horizontal as well as in over-head applications

• Water proof
• Accurate pH balance
• Longer shelf life

• MRA C-40 is an emulsifying agent to be mixed with diesel to obtain a mould release agent.

• Perma MRA C-40 when mixed with diesel functions like a mould release agent and it can be applied to all types of shutters
• Moulds
• Steel
• Timber
• Playwood
• Plastic and rubber moulds

• MRA C-40 is available in 20 ''tr. and 200 ttr drum.

• Longer shelf life
• High temperature applications
• Safe to use

• Perma Plaster Putty is a fine powder in white and light grey colour based on ordinary portland cement / white cement,
• Selected polymers and filters. This product provides a final surface for application of paint on to the walls and
• Ceiling This product can also be used for exterior application

• Creation of smooth surface for application of paint to the walls and ceiling
• It can be used on plasters, ROC or brick or block work directly

• Clean the surface to remove dirt, dust, laitance, oil, grease etc. Dampen concrete or the plastered surface if it is very dry or wherever required
• Mix 350 to 390 ml of clean water to 1 kg Perma Plaster Putty
• Mix thoroughly and keep it for 5 to 10 minutes and remix to obtain an even consistency creamy paste
• Apply this paste on the plaster or brick or block work or concrete surface with spatula or putty blade
• If there is a need to build up thickness it can be applied in layers taking care to see that the first layer has dried before the second layer is applied. One day light curing may be considered for optimm result
• Sand paper the surface next day to perfect evenness with sand paper no 500 and dust it clean before Application of paint

• Provide accurate proofing
• Longer shelf life
• Highly effective

• Ordinary exterior emulsions cannot protect external walls from patches of dampness, algae and fungus caused by rains
• These emulsions cannot protect the walls from atmospheric carbonation which causes dark patches on the surface and its penetration inside causes corrosion of steel
• Perma Unicoat is specially formulated to give long lasting protection and beautiful looks

• Perma Unicoat is composed of elastic latex polymers hence bridges hairline cracks
• It is water resistant - does not absorb any water nor does it allow any water or dampness to penetrate the masonry
• Special paint preservatives are incorporated to fight fungus and algae growth
• Polymer enriched formulation to give shine unblemished finish year after year
• Once coated Perma Unicoat lasts for years together
• There is no need to coat year after year

• First apply a primer coat by diluting Perma Unicoat with 25 % water
• Allow it to dry over night and apply undiluted Perma Unicoat by brush or roller as final coat to a desired finish
• The desired shade can be obtained through a standard tinting machine available with leading Paint Dealers