Perma Construction Aids Private Limited

• Perma paver coat creates a deep penetrating barrier coating which protects and improves surface by bringing out richness in the colour of tiles, stones, slate etc. It provides a protective barrier on ponous surface which resist chemical attack and eliminates dusting.

• Perma paver coat is a one pack colouless acrylic coating which provides integral protection to paver blocks, tiles, slates etc.

Perma Manufacture POLYMER BASED WATERPROOF MORTAR FOR LAYING VARIOUS MASONRY BLOCKS

PERMA BLOCK FIX :

Perma Block Fix is a polymer modified adhesive mortar specially designed for thin bed fixing of masonry blocks of various kind including light weight blocks. PERMA Block Fixing Mortar helps in block fixing with thin water tight joints which are strong and give better bonding of the blocks in the masonry.

• Perma Block fix is available in 25 kg and 50 kg sacks

• Perma Block fix is a ready to use material which requires just addition water on site to make a ready to use mortar
• Because of thin bed block fixing one can get extra strong bonding of the blocks and helps in achieving good plumb
• Perma Block Fix joints are waterproof hence there is no chance of rising dampness in the masonry
• No soaking of the block required. No curing required

• Perma pinnacle excel is a high strength polymer based adhesive developed for superior adhesion on non porous surface. The adhesive could be used with water or latex SBR for fixing ceramic tiles, marble stone on floor and facades.

• For fixing porous and non-porous tiles
• For fixing tile slabs on facades
• For fixing Glass Mosaic and glass blocks
• For fixing panels made of Polystyrene, Polyurethane foams etc

• Single component hence easy to use
• No wetting of tile required
• Makes the tiles area waterproof if adhesive used as 100 percent bedding material
• Multifold application

• Excellent adhesiveness
• Enhanced durability
• Moisture resistance

• Can be used for fixing tile over tile
• No need to break of hack the existing tiles
• No wetting of surface to be tiled

• Optimum quality
• Works against corrosion
• Prevent loosening

• Ensure Mal the surface to be tiled is clean and free from dust, dirt, grease etc
• Mix NSA with clean water, in the proportion of 3.5 volumes of powder to I volume of water
• M, till a uniform consistency, smooth paste is obtained. Leave the paste for ten minutes in the pan for the entrapped air if any, to escape and rem, the paste
• Apply the paste uniformly on to the surface to be tiled as well as on the back of the tile and press the tiles in position
• While using NSA wetting of the tiles or the surface to be tiled or curing is not required
• Fill the tile joints with Perma C-Tone Filler after 24 hours of file laying.

• BS 5980:1980, Draft CEN:prEN 12004-1997

• Perma NSA is mainly used for fixing glazed, cremic terrcotta tiles and vitreous tiles, marble and granite tiles on existing mosaic or ceremic floor tiles without removing them or hacking them. Perma NSA is also used for tiling on difficult vertical cementitious surfaces and in cases where the weight of the tiles is more than the normal ones.

• One Kg of NSA yields a paste of 600 cc. One kg of NSA can fix tiles on an area of 3.25 Sq.ft. If marbles tiles are fixed with a uniform bed thickness of 2 mm of adhesive

• Perma NSA is available in 1 kg corrugated printed carton and 10 kg and 25 kg multi wall laminated sacks

• Can be used for fixing tile over tile
• No need to break or hack the existing tiles
• No wetting of surface to be tiled

• Perma paver paint is used for coating paver tiles interlocking blocks and concrete floors and gangways in the walkways and parking lots
• Perma paver paint can be used for coating parking areas in the shopping malls and supermarkets
• As a constrasting colour marking on the walkways and in joggers parks
• Perma paver paint is used for coating swimming pools, fountains, water bodies and water tank
• Perma paver paint is also used for coating tennis / badminton / squash courts

• Paver paint is single component hence can be directly brush applied from the can itself
• Paver paint is abrasion resistant hence takes foot traffic as well as wheel traffic easily

• Perma paver paint is supplied in 20 kg metal containers

• High adhesive strength
• Solvent resistant
• Accurate composition

• Ftrma UTA is a cementitious material in powder form composed of Cement and Sand, which only needs on site addition of water to make a mortar which is used for fixing tiles over any cementitious surface or on e4sting mosaic tiles without removing them
• Perma UTA is also used for fixing tiles on difficult surfaces also

• BS 5980:1980 Draft CEN:prEN 12004-1997

• Perma UTA is mainly used for fixing glazed, ceramic, terracotta tiles and vilrious tiles, marble and granite tiles on cementitious surface or on existing mosaic or ceremic floor tiles without removing them or hacking them
• Perma UTA is also used for tiling on difficult vertical cementitious surfaces and in cases where the weight of the tiles is more than the normal ones
• UTA can also be used for plaster crack repair and paver joint grouting

• Bullk Density: 1650 Kg/m3
• Pot Life of paste: 45 min at 35°C
• Form: Free flowing powder
• Color: Grey

• One kg of perma UTA yields a paste of 600 cc. If tiles are fixed with a uniform bed thickness of 2 mm of adhesive then one kg of NSA can fix tiles on an area of 3.22 Sft.

• Perma UTA is available in 10 kg and 25 kg multi wall laminated sacks

• Can be used for fixing tile over tile
• No need to break or hack the existing tiles
• No weting of tiles required befor fixing
• No wetting of surface to be tilled
• Makes the tiled area waterproof

• Perma peak super is a non slip cementatious high adhesive quartz and filler based adhesive product with high dispersion polymers and binders to impart permanent stability for fixing of tiles. Highly recommended for fixing on floor and walls. Available as a white or grey based material.

• Perma peak super is used to fix tiles for outdoor and indoor application. Glazed tiles vitrified, non-vitrified tiles, porcelain, stoneware tiles goves well with perma peak super tiles adhesive. Perma peak super is used for fixing on difficult surface.
• Epcon Tile Grout

• Perma peak super is available in 25 kg and 50 kg sacks

• For fixing tiles, stones on diffecult surfaces
• Can be used for tile on tile application
• Can be used in swimming pools and for facade tile fixing
• Withstand high temperature
• Waterproofs the tiled area if applied evenly

• Perma paver coat WD is a milky white liquid based on acrylic copolymers and surface active agents

• Perma Paver Coat-WD penetrates the capillary structure and procides for a tough, clear protection films
• Perma Paver Coat-WD on curing forms a glossy film.
• Perma Paver Coat_WD is resistant to oil, grease and stains
• Perma Paver Coat-WD can be applied even unskilled labourers

• Perma Joint Shield is used to protect the tile joint in the floor tiles from the attack of mild acids, which are used in routine daily mopping of the floors
• It enhances the colour of the tile joint filler and makes the tile joint resistant to stains
• It is suitable for protecting old as well as new tile joints
• The results however are better on the newly laid tile joints

• Highly adhesive
• Purity
• Accurate composition

• Perma Glass Mosaic Adhesive (GMA) is a two component cementitious material based on special polymers, which only needs on site mixing of the two pre-weighed components to make a paste which is used for fixing glass mosaic tiles and 1 or laying G.s Blocks

• Perma GMA is mainly used for fixing glass mosaic tiles and for laying the decorative glass blocks in glass walls

• Ensure that the surface to be tiled is clean and free from dust, dirt, grease etc. Mix C-Tone Filler of desired shade with water and apply the paste liberally on the back of the tiles so that all the joints are filled completely with the joint filler
• Wipe clean the back of the tile so that all the joint filler is removed Iron the surface of the tile
• Now mix the two components of the GMA and apply it on the back of the tiles as well as on the surface to be tiled and press the tile in position
• After 24 hours rub the surface of the the with a wet cloth or sponge till the paper comes out of the tile surface

• Mix the two components of the Glass Mosaic Adhesive to form a neat paste, Lay the blocks on the bedding mortar of the GMA in the fashion of ordinary brick laying. After 48 hours of laying the blocks rake out the joints and fill them up with a white acrylic sealant.

• One kg of GMA yield a paste of 600 cc. If tiles are fixed with a uniform bed thickness of 2 mm of adhesive then one kg of GMA can fix tiles on an area of 3.22 Sft.

• Perma glass mosaic adhesive is available in 10 kg packaging and in bulk. Bulk packing comprises of liquid in 20 litre drum and powder in 20 kg x sacks

• Easy to use
• No wetting of surface to be tiled
• Makes the tiled area waterproof
• Holds the tile even at high temperatures

• Purity
• No wetting of surface to be tiled
• Long shelf life

• Perma glass tile mortar is a polymer modified cementitious material in white powder form, which only need on site addition of water to make a paste, which is used for filling and fixing glass mosaic tiles
• It is suitable for use on vertical as well as horizontal surface

• BS 5980:1980 Draft CEN:prEN 12004-1997

• Bullk Density: 1650 Kg/m3
• Pot Life of paste: 45 min at 35°C
• Form: Free flowing powder
• Color: Brilliant White

• One kg of perma UTA yields a paste of 600 cc. If tiles are fixed with a uniform bed thickness of 2 mm of adhesive then one kg of NSA can fix tiles on an area of 3.22 Sft

• Perma UTA is available in 10 kg and 25 kg multi wall laminated sacks

• Single component hence easy to use
• No wetting of surface to be tiled
• Makes the tiled area waterproof
• GTM is specially developed for fixing glass mosaic tiles

• Perma multi clean is a multipurpose cleaning liquid useful in several requirement in house hold as well as construction and civil engineering applications. It is also an excellent cleaning agent for removing concrete and mortar runs form tolls, wheel barrowns and concrete mixer drums etc.

• Liquid hence easy to use
• Can be diluted upto 1.3 with water hence very ecconomical in use
• No corrosive action on plastic, glass and most base metals

• Cleaning of filed areas in bathrooms and toilets
• Cleaning of mosaic floor tiles and granite and marble platforms etc
• Cleaning of metal shutters and form work panels befor application of mould releasing agent
• Cleaning of brick work and concrete to remove mortar droppings and plaster funs
• Cleaning of masons tools wheelbarrows and concrete mixer drums transit-mixer drums etc
• Cleaning of rubber and metal moulds in pzer-casting yards

• Waterproof
• Extremely durable
• Easy to use

• While fixing polished stones, huge granite or marble slabs, synthetic marble or granite slabs to the vertical surfaces, normal adhesives do not hold their weight, as these stones are too heavy and have a close grained surface which is smooth
• For this reason such slabs are either mechanically fixed with anchor fasteners or a mechanical key is created on the rear surface of the slabs, so that a general purpose adhesive can be used
• Perma Stone Adhesive is used for creating mechanical key on the stone surfaces

• Perma stone adhesive is mainly used for creating an effective mechanical key on the smooth stone surfaces

• 500 gms in premeasured units

• Easy to use
• Complicated mechanical fixing is avoided
• Economical method of stone fixing

• Accurately processed
• Effectiveness
• Provide Perfect jointing

• RTF is a three component epoxy resin based mortar used for filling joints between acid proof Ses in the industrial floors. RTF provides aesthetic germproof, permanent, hard wearing, chemical resistant joints for industrial floor tiles
• It provides a smooth, hygienic and dust free floor tile joints

• BS-5980:1980
• BS-5385: Part 4: 1992, Section 9

• For grouting industrial floor joints and joints between kota stones, mandana stones and joints of any such acid proof flooring material where strength and chemical resistant properties are expected

• Coverage of CIF depends on the size of the tile, thiclmess of the tile and the width of the joint
• A table is available in the shade card of CIF wNcff gives coverage for various sizes of tiles in different joint widths
• Coverage is specified in Sq. ft. per pack of SGO gms

• High compressive, flexural and tensile strengths in excess of concrete
• Availabe in range of attractive colours: Ivory, Creamy Yellow, Golden Yellow, Creamy Pink, Frosty Brown, Copper Cloud, Pista Green, Sky Blue, Royal Blue, Terracotta Brown etc
• Chemical resistant and waterproof
• Hygienic and non dusting
• Easy to use, easy to clean
• Epoxy based, Supplied in pre weighted units
• Will not support bacterial growth